SWK-2000/130

  • Njord SWK-2000/130MK Prefilter and Polisher in one

    Separ SWK-2000/130MK Prefilter AND Polisher on back plate with:
    – 2400 lph pump (110 or 230 Volt AC) with on-off switch
    – Njord Fuel Conditioner NFC-3000
    – 2 manual valves for feed to pump or engine

    6.788,10 tax incl.
  • SWK-2000/130MK 7800l Water Contacts

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    4.186,60 tax incl.
  • SWK-2000/130MS 7800l Metal Bowl ans Submarine Water Probe

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    4.535,08 tax incl.
  • SWK-2000/130UMK 7800l Metal Bowl

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    9.341,20 tax incl.