Njord C-MTC-900 Compact Mobile Tank Cleaning Systems
Njord C-MTC-900 Compact Mobile Tank Cleaning Systems 900 lph (240 gph) 12 or 24 VDC with:
– Strainer to separate heavy sediments
– Optional Separ SWK2000/18 or Racor 3250R30 Prefilter
– Secondary absolute water-block filter
– Njord NFS-500A Fuel Conditioner
– Manual on-off switch
– No automation (upgradable)
– Optional hose set and dummy spin-on for free water removel
– Other flow rates and configurations available
€1.319,40 €1.596,47 tax incl.
- Beschrijving
- Extra informatie
- Beoordelingen (0)
Beschrijving
Njord C-MTC-900 Compact Mobile Tank Cleaning Systems (900 lph) are recommended for cleaning (bio)diesel fuel tanks as well as the fuel in various applications WITHOUT tank entry. Both above ground and underground tanks can be cleaned using our systems. Depending on the tank size a different flow rate is recommended. When cleaning the tank and fuel we recommend to use our Fuel Additive Diesel UltraClean to clean the tank walls, dissolve tank sludge and stabilize the fuel.
Key Features:
– Strainer to separate heavy sediments
– Compact design and low weight
– Absolute filtration in final filter
– Two step water separation
– Fuel Conditioner to stop micro-organism growth and stabilize fuel
– Fuel Quality required for Common Rail engines
– Including suction and return hoses
– Back support for free standing
– Prefilter and Filter/Separator optional
– Filtration Controller optional
– Flow meter optional
– Can be installed as fixed system
Options:
– Separ or Racor filter/water separator as pre-filter
– Clear fuel hoses (2x 4m), dummy spin-on filter
– Tank Access Points for connection to existing tanks
Extra informatie
| Weight | 12 kg |
|---|---|
| Dimensions | 40 × 60 × 20 cm |
Wees de eerste om “Njord C-MTC-900 Compact Mobile Tank Cleaning Systems” te beoordelen
Related Products
-
Toevoegen aan winkelwagenQuick ViewNjord SWK-2000/5/50K Prefilter and Polisher in one
€980,74 €1.186,70 tax incl.Separ SWK-2000/5K Prefilter AND Polisher on back plate with:
– 300 lph pump (12 VDC) with on-off switch
– Njord Fuel Conditioner NFC-200
– 2 manual valves for feed to pump or engineToevoegen aan winkelwagenQuick View -
Quick ViewFuel Polishing System APS-2400-F-Pro
Njord automatic Fuel Polishing Systems are recommended for use on board yachts that have 12 or 24 Volt DC available and limited space.To bring and keep the fuel in good condition and meet the engine manufacturers’ fuel cleanliness requirements, it is essential to keep water content below 70 ppm and reach at least an 18-16-13 ISO 4406:1999 particle size distribution. This is realized using the Njord automatic Fuel Polishing Systems running in a parallel recirculation loop to the fuel tank.
Quick View -
Toevoegen aan winkelwagenQuick View
Njord SWK-2000/10K Prefilter and Polisher in one
€1.053,73 €1.275,01 tax incl.Separ SWK-2000/10K Prefilter AND Polisher on back plate with:
– 600 lph pump (12 or 24 VDC) with on-off switch
– Njord Fuel Conditioner NFC-500A
– 2 manual valves for feed to pump or engineToevoegen aan winkelwagenQuick View -
Quick ViewFuel Polishing System APS-600-F 12/24 VDC 2020
Njord Performance Line automatic Absolute Fuel Polishing Systems are recommended for use on board yachts that have 110 or 230 Volt AC available. They can also be used for industrial Fuel Polishing applications inside a building.
As water enters the tank with the consumption of fuel through the air pipe, micro-organism contamination is always a threat. To make sure your engines or generators run reliably and efficiently on (bio)diesel, it is strongly recommended to install a fuel polishing system on board.
Quick View -
Quick ViewFuel Polishing System APS 1700-F Performance
Njord Performance Line automatic Absolute Fuel Polishing Systems are recommended for use on board yachts that have 110 or 230 Volt AC available. Fuel Polishing Systems can also be used for industrial Fuel Polishing applications inside a building.
Diesel fuel is naturally unstable and forms sediments over time. As water enters the tank with the consumption of fuel through the air pipe, micro-organism contamination is always a threat. The drastic reduction of sulfur and addition of bio-components to diesel fuel in recent years have further reduced shelf life and increased fuel related headaches. To make sure your engines or generators run reliably and efficiently on (bio)diesel, it is strongly recommended to install a fuel polishing system on board.
To bring and keep the fuel in spec and meet the engine manufacturers’ fuel cleanliness requirements, it is essential to keep water content below 70 ppm and reach at least an 18-16-13 ISO 4406:1999 particle size distribution.
Quick View
Beoordelingen
Er zijn nog geen beoordelingen.