Air Sentry L-143 In-Line Low-Pressure Air Breather
€ 101,28 Excl. VAT
€ 122,55 Incl. VAT
1/2″ FNPT, maximum water absorption capacity 145 ml (4.91 fl. oz.)
Maximum reservoir fluid flow: 285 lpm or 75 gpm
100% Silica Gel
Maximum airflow: 10 cfm (0.285 m³/minute)
Description
Air Sentry® In-Line Filters/Dryers remove water vapor and solid contaminants from exhaust air lines, low-pressure compressed air lines, vacuum lines, and other in-line airflow applications where clean, dry air is required.
The L-Series breathers are available with 100% silica gel or activated carbon, or a combination of both, as needed.
Air enters the filter/dryer at one end and emerges clean and dry at the other end. Water vapor and solid particles as small as 2 microns are removed. The L-Series is rated up to 60 psi and is mounted on the regulated side of the air line. This series offers the following benefits:
- Minimize rust and corrosion
- Reduce component wear
- Reduce maintenance costs
- Extend fluid life
- Reduce oil oxidation
- Eliminate fumes and odors
Additional Information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 15 × 9 × 9 cm |
