Separ offers rather compact water separation and particulate filtration housings that need to be placed before the pump. It is recommendable to place at least a water alarm on the filter, so you know when to drain the filter. IF watrer reaches the filter element in the top of the housing, it will disarm the teflon coating and water will pass right through towards your engine !!

  • Filter element 0530 SWK2000/5 30μ

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    12,10 14,64 tax incl.
  • Filter element 0510 SWK2000/5 10μ

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    12,10 14,64 tax incl.
  • Filter element 01010 SWK2000/10 10μ

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    15,18 18,37 tax incl.
  • SWK-2000/5 300 LPH

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a 'full flow' ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a 'full flow' ball valve to prevent fuel draining back into the fuel tank.

    169,14 204,66 tax incl.
  • Vacuum Gauge

    Compound vacuum gauge for Separ Filter SWK-2000 Series of fuel water separators.

    13,75 16,64 tax incl.
  • Filter element 01830 SWK2000/18 30μ

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    23,10 27,95 tax incl.
  • Z Hose barb connector

    12,89 15,60 tax incl.
  • Filter element 01030 SWK2000/10 30μ

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    15,18 18,37 tax incl.
  • Filter element 00530/50 SWK2000/5/50 30μ

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    12,96 15,68 tax incl.
  • Visual Water Alarm Module 24 VDC

    49,69 60,12 tax incl.
  • Filter element 00510/50 SWK2000/5/50 10μ

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    12,96 15,68 tax incl.
  • SWK-2000/10K 600 LPH, Clear Bowl

    The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
    Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
    Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
    Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
    Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
    Low restriction reduces wear on fuel pumps and ensures full RPMs.
    Back flushable (cleanable) element reduces down time and costly element changes.
    The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
    In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.

    199,05 240,85 tax incl.
1
    Your Cart
    Vacuum Gauge
    1 X 13,75 = 13,75