Diesel Polishing Systems

Njord Diesel Polishing Systems remove water, micro-organism and solids from your diesel tanks by recirculating the fuel over the system at regular intervals. They can also be placed before the engine to improve the fuel quality goign towards the engine and reduce emissions.

Every fuel tank is its own biosphere. Fuel taken out by the engine is replaced with (moist) air, giving rise to the potential contamination with micro-0rganism. The bio-component in the fuel is also increasing the moisturen levels in the fuel and can sometimes even fall out of the fuel, causing filter blocking.

Njord Diesel Polishing Systems will take out this unwanted debris, avoiding unexpected and unwanted diesel related hear-aches. Systems with alarms will alert you to required Njord systems maintenance, while your engine is still operating trouble free !!

  • Njord C-MTC-900 Compact Mobile Tank Cleaning Systems

    Njord C-MTC-900 Compact Mobile Tank Cleaning Systems 900 lph (240 gph) 12 or 24 VDC with:
    – Strainer to separate heavy sediments
    – Optional Separ SWK2000/18 or Racor 3250R30 Prefilter
    – Secondary absolute water-block filter
    – Njord NFS-500A Fuel Conditioner
    – Manual on-off switch
    – No automation (upgradable)
    – Optional hose set and dummy spin-on for free water removel
    – Other flow rates and configurations available

    1.319,40 1.596,47 tax incl.
  • Njord SWK-2000/5/50K Prefilter and Polisher in one

    Separ SWK-2000/5K Prefilter AND Polisher on back plate with:
    – 300 lph pump (12 VDC) with on-off switch
    – Njord Fuel Conditioner NFC-200
    – 2 manual valves for feed to pump or engine

    980,74 1.186,70 tax incl.
  • Fuel Polishing System APS-2400-F-Pro

    Njord automatic Fuel Polishing Systems are recommended for use on board yachts that have 12 or 24 Volt DC available and limited space.To bring and keep the fuel in good condition and meet the engine manufacturers’ fuel cleanliness requirements, it is essential to keep water content below 70 ppm and reach at least an 18-16-13 ISO 4406:1999 particle size distribution. This is realized using the Njord automatic Fuel Polishing Systems running in a parallel recirculation loop to the fuel tank.

  • Fuel Polishing System AFS-1700F-Performance

    Njord automatic Performance Line Fuel Filtration Systems are recommended for use in Continuous Power, Emergency Power and Home Based Tank setups at for instance mining sites, transportation and other industrial companies. They have the same filtration as the PRO line, but come with a more economical pump, controller and cabinet.

  • Fuel Polishing System APS-600-F 12/24 VDC 2020

    Njord Performance Line automatic Absolute Fuel Polishing Systems are recommended for use on board yachts that have 110 or 230 Volt AC available. They can also be used for industrial Fuel Polishing applications inside a building.

     As water enters the tank with the consumption of fuel through the air pipe, micro-organism contamination is always a threat. To make sure your engines or generators run reliably and efficiently on (bio)diesel, it is strongly recommended to install a fuel polishing system on board.

     

     

  • Fuel Polishing System APS 1700-F Performance

    Njord Performance Line automatic Absolute Fuel Polishing Systems are recommended for use on board yachts that have 110 or 230 Volt AC available. Fuel Polishing Systems can also be used for industrial Fuel Polishing applications inside a building.

    Diesel fuel is naturally unstable and forms sediments over time. As water enters the tank with the consumption of fuel through the air pipe, micro-organism contamination is always a threat. The drastic reduction of sulfur and addition of bio-components to diesel fuel in recent years have further reduced shelf life and increased fuel related headaches. To make sure your engines or generators run reliably and efficiently on (bio)diesel, it is strongly recommended to install a fuel polishing system on board.

    To bring and keep the fuel in spec and meet the engine manufacturers’ fuel cleanliness requirements, it is essential to keep water content below 70 ppm and reach at least an 18-16-13 ISO 4406:1999 particle size distribution.

  • Njord Portable Mobile Tank Cleaning Systems

    • Compact design and low weight
    • –  Bypass around spinon filter to evacuate waterand heavy debris
    • –  Absolute filtration with water-block
    • –  Fuel quality required for Common Rail engines
    • –  Including suction and return hoses
    • –  Optional Fuel Conditioner to stop micro-organism growth and stabilize fuel
    • –  Optional prefilter
    • –  Optional Filtration Controller
    • –  Optional flow meter
    2.511,02 3.038,33 tax incl.
  • Njord SWK-2000/130MK Prefilter and Polisher in one

    Separ SWK-2000/130MK Prefilter AND Polisher on back plate with:
    – 2400 lph pump (110 or 230 Volt AC) with on-off switch
    – Njord Fuel Conditioner NFC-3000
    – 2 manual valves for feed to pump or engine

    8.530,17 10.321,51 tax incl.
  • Njord SWK-2000/40MK Prefilter and Polisher in one

    Separ SWK-2000/40MK Prefilter AND Polisher on back plate with:
    – 900 lph pump (12 or 24 VDC) with on-off switch
    – Njord Fuel Conditioner NFC-500A
    – 2 manual valves for feed to pump or engine

    2.536,25 3.068,86 tax incl.
  • Njord SWK-2000/5K Prefilter and Polisher in one

    Separ SWK-2000/5K Prefilter AND Polisher on back plate with:
    – 300 lph pump (12 VDC) with on-off switch
    – Njord Fuel Conditioner NFC-200
    – 2 manual valves for feed to pump or engine

    868,21 1.050,53 tax incl.
  • Njord SWK-2000/18K Prefilter and Polisher in one

    Separ SWK-2000/18K Prefilter AND Polisher on back plate with:
    – 900 lph pump (12 or 24 VDC) with on-off switch
    – Njord Fuel Conditioner NFC-500A
    – 2 manual valves for feed to pump or engine

    1.666,50 2.016,47 tax incl.
  • Njord SWK-2000/10K Prefilter and Polisher in one

    Separ SWK-2000/10K Prefilter AND Polisher on back plate with:
    – 600 lph pump (12 or 24 VDC) with on-off switch
    – Njord Fuel Conditioner NFC-500A
    – 2 manual valves for feed to pump or engine

    1.053,73 1.275,01 tax incl.
0
    Your Cart
    Your cart is emptyReturn to Shop