-
Toevoegen aan winkelwagenQuick ViewCim-Tek 400 particulate element 30μ CT70016
€24,50 €29,65 tax incl.Cim-tek filters are an economical and effective way to remove emulsified water, particulate and micro-organism from fuel and oil. Free water is best removed using a water separator – preferably before the fuel pump, as the water does make the Cim-teks block. we recommend Separ or Racor water separators. Cim-tek elements either only take out particulate or both particulate and emulsified water. They are available with nominal cellulose filter elements as well as the much more effective absolute glass fibre based filter elements, and then with or without absorption material to eliminate the emulsified water from the fuel or oil. The latter prevents the growth of micro-organism. Different element and filter head sizes are for different pump flow rate rates. The lower the micronnage on the filter, the better it filters and removes water.
Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewNjord Acticide CMG (biocide) 1 kg bottle
€62,92 €76,13 tax incl.GERMAN Made Acticide CMG (Thor) is an effective biocide against micro-organism in diesel fuel, gasoline and kerosene. Depending on the contamination level, a different dosing level is required.
Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick View260 filter head CIMTEK 1” BSP F
€34,28 €41,48 tax incl.Spin-on filters are an economical and efficient way to get emulsified water, particulate and micro-organism from fuel and oil. Free water should be taken out using a water separator – preferably before the fuel pump. Elements either just take out particulate or both particulate and emulsified water. Elements are available with nominal cellulose elements as well as absolute glass fibre based filter elements. Absorption material is used to get the emulsified water out of the fuel or oil. Different sizes for different flow rate ranges.
Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewNjord Acticide CMG (biocide) 0,5 kg bottle
€44,74 €54,14 tax incl.GERMAN Made Acticide CMG (Thor) is an effective biocide against micro-organism in diesel fuel, gasoline and kerosene. Depending on the contamination level, a different dosing level is required.
Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewCim-Tek 800 absolute particulate element 2 μ CT70036
€76,33 €92,36 tax incl.Cim-tek filters are an economical and effective way to remove emulsified water, particulate and micro-organism from fuel and oil. Free water is best removed using a water separator – preferably before the fuel pump, as the water does make the Cim-teks block. we recommend Separ or Racor water separators. Cim-tek elements either only take out particulate or both particulate and emulsified water. They are available with nominal cellulose filter elements as well as the much more effective absolute glass fibre based filter elements, and then with or without absorption material to eliminate the emulsified water from the fuel or oil. The latter prevents the growth of micro-organism. Different element and filter head sizes are for different pump flow rate rates. The lower the micronnage on the filter, the better it filters and removes water.
Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewCim-Tek 800 particulate element 30 μ CT70020
€37,17 €44,98 tax incl.Cim-tek filters are an economical and effective way to remove emulsified water, particulate and micro-organism from fuel and oil. Free water is best removed using a water separator – preferably before the fuel pump, as the water does make the Cim-teks block. we recommend Separ or Racor water separators. Cim-tek elements either only take out particulate or both particulate and emulsified water. They are available with nominal cellulose filter elements as well as the much more effective absolute glass fibre based filter elements, and then with or without absorption material to eliminate the emulsified water from the fuel or oil. The latter prevents the growth of micro-organism. Different element and filter head sizes are for different pump flow rate rates. The lower the micronnage on the filter, the better it filters and removes water.
Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewFilter element 01010 SWK2000/10 10μ
€16,70 €20,21 tax incl.The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
Low restriction reduces wear on fuel pumps and ensures full RPMs.
Back flushable (cleanable) element reduces down time and costly element changes.
The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick View800 filter head CIMTEK 1” BSP
€63,53 €76,87 tax incl.Spin-on filters are an economical and efficient way to get emulsified water, particulate and micro-organism from fuel and oil. Free water should be taken out using a water separator – preferably before the fuel pump. Elements either just take out particulate or both particulate and emulsified water. Elements are available with nominal cellulose elements as well as absolute glass fibre based filter elements. Absorption material is used to get the emulsified water out of the fuel or oil. Different sizes for different flow rate ranges.
Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewElement 2010SM-OR 2 micron for Turbine 500 series
€18,45 €22,32 tax incl.Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewCim-Tek 260 hydroglass element 2 μ CT70232
€74,01 €89,55 tax incl.Cim-tek filters are an economical and effective way to remove emulsified water, particulate and micro-organism from fuel and oil. Free water is best removed using a water separator – preferably before the fuel pump, as the water does make the Cim-teks block. we recommend Separ or Racor water separators. Cim-tek elements either only take out particulate or both particulate and emulsified water. They are available with nominal cellulose filter elements as well as the much more effective absolute glass fibre based filter elements, and then with or without absorption material to eliminate the emulsified water from the fuel or oil. The latter prevents the growth of micro-organism. Different element and filter head sizes are for different pump flow rate rates. The lower the micronnage on the filter, the better it filters and removes water.
Toevoegen aan winkelwagenQuick View -
Hot
Toevoegen aan winkelwagenQuick ViewKolor Kut Gasoline Gauging Paste
€11,07 €13,39 tax incl.Original Kolor Kut Gasoline Gauging Paste. For checking the depth of Gasoline, Diesel, Biodiesel, Kerosene, and many other fuel oils in fuel tanks. The product is not so effective with Alcohols – because the alcohols evaporate off the dipping tape quickly returning the paste to its original state.
Applied to a Dipping Tape and lowered to the bottom of a Gasoline tank, the paste changes colour where it comes into contact with Gasoline / Petrol, giving you a visual indication as to the depth of the Gasoline Kolor Kut gasoline gauging paste is the only gasoline paste approved by the US Military. It is designed for gauging levels of hydrocarbons. It should always be applied “sparingly” direct onto a dip stick or dipping tape at about the point where the level is expected.
As a contact product it would usually instantaneously change from pink to red on contact with hydrocarbons. Heavy oils require a few seconds of contact. It is a one off action paste and repeat dips will require a fresh application of paste. Low levels of paste are miscible with hydrocarbons.The paste is not designed to be disturbed and should not be used in a sample.
It would be best practice that any tank/vessel being sampled for analysis be sampled first. Analytical results are only as accurate as the sample itself. Gauging of the tanks with paste used sparingly should be the secondary operation.
Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewCim-Tek 400 particulate element 10μ CT70015
€24,81 €30,02 tax incl.Cim-tek filters are an economical and effective way to remove emulsified water, particulate and micro-organism from fuel and oil. Free water is best removed using a water separator – preferably before the fuel pump, as the water does make the Cim-teks block. we recommend Separ or Racor water separators. Cim-tek elements either only take out particulate or both particulate and emulsified water. They are available with nominal cellulose filter elements as well as the much more effective absolute glass fibre based filter elements, and then with or without absorption material to eliminate the emulsified water from the fuel or oil. The latter prevents the growth of micro-organism. Different element and filter head sizes are for different pump flow rate rates. The lower the micronnage on the filter, the better it filters and removes water.
Toevoegen aan winkelwagenQuick View
Ask for best offer
Order before 15:00 on working days , same day shipping for products in stock
