Njord SWK-2000/5K Prefilter and Polisher in one
Separ SWK-2000/5K Prefilter AND Polisher on back plate with:
– 300 lph pump (12 VDC) with on-off switch
– Njord Fuel Conditioner NFC-200
– 2 manual valves for feed to pump or engine
€868,21 €1.050,53 tax incl.
- Beschrijving
- Extra informatie
- Beoordelingen (0)
Beschrijving
Njord SWK-2000/5K Prefilter and Polisher in one is mounted on a back plate to allow you to recirculate the fuel over your tank using your prefilter and thereby polish your fuel without having to add additional tank connections.
They are recommended for use on board yachts that have 12 or 24 Volt DC available and very limited space. They can be used to clean a dirty tank before installation and then be installed in the engine area.
Key Features:
– Modular compact design on aluminum back plate
– Plug & Play system connecting to existing suction and return lines
– On-off switch with 12 or 24 VDC power requirement
– Upgradable with controller and sensors later on
Options:
– Water alarm
– Vacuum dirty filter alarm
– Fuel Conditioner to reduce particle size and stop microorganism growth
– Automated filtration controller with week clock plus water, filter and leak sensors
– Absolute filtration in secondary filter
– Leak tray
– Tank Access Points for connection to existing tanks
– Hand priming pump
Extra informatie
| Weight | 9 kg |
|---|---|
| Dimensions | 30 × 30 × 17 cm |
Wees de eerste om “Njord SWK-2000/5K Prefilter and Polisher in one” te beoordelen
Related Products
-
Toevoegen aan winkelwagenQuick ViewNjord CPS-600-PF Fuel Polishing System
€2.061,95 €2.494,96 tax incl.Absolute Convertible Njord CPS-600-PF Fuel Polishing System 600 lph (180 gph) with:
– Separ SWK2000/10 Prefilter
– Secondary absolute water-block filter
– Njord NFS-500A Fuel Conditioner
– Manual on-off switch
– No without automation (upgradable)Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewNjord SWK-2000/5/50K Prefilter and Polisher in one
€980,74 €1.186,70 tax incl.Separ SWK-2000/5K Prefilter AND Polisher on back plate with:
– 300 lph pump (12 VDC) with on-off switch
– Njord Fuel Conditioner NFC-200
– 2 manual valves for feed to pump or engineToevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewSWK-2000/5 300 LPH
€169,14 €204,66 tax incl.The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
Low restriction reduces wear on fuel pumps and ensures full RPMs.
Back flushable (cleanable) element reduces down time and costly element changes.
The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a 'full flow' ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
In applications where the fuel level is below the filter it is still advisable to install a 'full flow' ball valve to prevent fuel draining back into the fuel tank.Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick ViewSWK-2000/5 UM 300 LPH Metal Bowl
€648,93 €785,21 tax incl.The SEPAR 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump.
Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 60mm is required for element change)
Separ 2000 series of fuel/water separators are compatible with B100 biodiesel.
Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems.
Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow.
Low restriction reduces wear on fuel pumps and ensures full RPMs.
Back flushable (cleanable) element reduces down time and costly element changes.
The ideal position for the filter is at the same height as the lift pump. However if the top of the fuel tank is above this position a full flow ball valve should be fitted, before, the filter so that the fuel flow can be shut off to allow filter maintenance.
In applications where the fuel level is below the filter it is still advisable to install a full flow ball valve to prevent fuel draining back into the fuel tank.Toevoegen aan winkelwagenQuick View -
Toevoegen aan winkelwagenQuick View
Njord SWK-2000/40MK Prefilter and Polisher in one
€2.536,25 €3.068,86 tax incl.Separ SWK-2000/40MK Prefilter AND Polisher on back plate with:
– 900 lph pump (12 or 24 VDC) with on-off switch
– Njord Fuel Conditioner NFC-500A
– 2 manual valves for feed to pump or engineToevoegen aan winkelwagenQuick View
Beoordelingen
Er zijn nog geen beoordelingen.